Example of CBWFQ QoS and Shaping

Shaping to 30mbps Maximum:

ip access-list extended ShapeMe
 permit ip 172.16.0.0 0.0.0.255 any

 permit ip any 172.16.0.0 0.0.0.255

!
class-map match-any ShapeMe
match access-group name ShapeMe
!
policy-map ShapeMe
class ShapeMe
shape average 30m
! Will shape at 30mbps maximum
!
int g0/0
service-policy output ShapeMe
! Apply to output interface. If needed in both ingress and egress, apply to both inside and outside interfaces

Priority for SQL Traffic?

ip access-list extended SQL
 permit tcp 10.113.32.0 0.0.3.255 10.113.176.0 0.0.3.255 range 1433 1434
 permit tcp 10.113.176.0 0.0.3.255 10.113.32.0 0.0.3.255 range 1433 1434

class-map match-any SQL
match access-group name SQL

policy-map SQL
class SQL
priority 1024
! Guarantees 1mbps at all times

int g0/0
service-policy output SQL
! Apply to output interface. If needed in both ingress and egress, apply to both inside and outside interfaces

What is I just want to shape traffic by the interface that it enters? Eg an internet or WAN interface?

! Since you can only shape on output, not input, in this example I will shape the Upstream and Downstream CIR rate to 100mbps down and 40mbps up. The inbound or internet interface is GigabitEthernet0/1. GigabitEthernet0/0 is the LAN side.

class-map match-any QoS_DOWN
 match input-interface GigabitEthernet0/1

class-map match-any QoS_UP
 match any

policy-map QoS_DOWN
 class QoS_DOWN
  shape average 100m

policy-map QoS_UP
 class QoS_UP
  shape average 40m

interface GigabitEthernet0/0
description LAN Interface
 service-policy output QoS_DOWN

interface GigabitEthernet0/1
description Internet Interface
 service-policy output QoS_UP